扫描报告 408 - FUJITSU ScanSnap S1500

扫描仪

  • 制造商: FUJITSU
  • 型号: ScanSnap S1500
  • Nice name: FUJITSU ScanSnap S1500
  • 设备 ID: sane:fujitsu:ScanSnap S1500:325519
  • 类型: Adf_Duplex
 scanner type
  1. source
    • title: Scan source
    • desc: Selects the scan source (such as a document-feeder).
    • type: <GType gchararray (64)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: ['ADF Front', 'ADF Back', 'ADF Duplex']
    • initial_value: ADF Duplex
  2. mode
    • title: Scan mode
    • desc: Selects the scan mode (e.g., lineart, monochrome, or color).
    • type: <GType gchararray (64)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: ['Lineart', 'Halftone', 'Gray', 'Color']
    • initial_value: Color
  3. resolution
    • title: Scan resolution
    • desc: Sets the resolution of the scanned image.
    • type: <GType gint (24)>
    • unit: <enum LIBINSANE_UNIT_DPI of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: [50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, 450, 475, 500, 525, 550, 575, 600]
    • initial_value: 300
  4. page-width
    • title: Page width
    • desc: Specifies the width of the media. Required for automatic centering of sheet-fed scans.
    • type: <GType gdouble (60)>
    • unit: <enum LIBINSANE_UNIT_MM of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: [0.0, 221.120849609375, 0.0211639404296875]
    • initial_value: 221.120849609375
  5. page-height
    • title: Page height
    • desc: Specifies the height of the media.
    • type: <GType gdouble (60)>
    • unit: <enum LIBINSANE_UNIT_MM of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: [0.0, 876.695068359375, 0.0211639404296875]
    • initial_value: 876.695068359375
  6. tl-x
    • title: Top-left x
    • desc: Top-left x position of scan area.
    • type: <GType gdouble (60)>
    • unit: <enum LIBINSANE_UNIT_MM of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: [0.0, 221.120849609375, 0.0211639404296875]
    • initial_value: 0.0
  7. tl-y
    • title: Top-left y
    • desc: Top-left y position of scan area.
    • type: <GType gdouble (60)>
    • unit: <enum LIBINSANE_UNIT_MM of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: [0.0, 876.695068359375, 0.0211639404296875]
    • initial_value: 0.0
  8. br-x
    • title: Bottom-right x
    • desc: Bottom-right x position of scan area.
    • type: <GType gdouble (60)>
    • unit: <enum LIBINSANE_UNIT_MM of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: [0.0, 221.120849609375, 0.0211639404296875]
    • initial_value: 221.120849609375
  9. br-y
    • title: Bottom-right y
    • desc: Bottom-right y position of scan area.
    • type: <GType gdouble (60)>
    • unit: <enum LIBINSANE_UNIT_MM of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: [0.0, 876.695068359375, 0.0211639404296875]
    • initial_value: 876.695068359375
  10. brightness
    • title: Brightness
    • desc: Controls the brightness of the acquired image.
    • type: <GType gint (24)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: [-127, 127, 1]
    • initial_value: 0
  11. contrast
    • title: Contrast
    • desc: Controls the contrast of the acquired image.
    • type: <GType gint (24)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: [-127, 127, 1]
    • initial_value: 0
  12. gamma
    • title: Gamma function exponent
    • desc: Changes intensity of midtones
    • type: <GType gdouble (60)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: [0.29998779296875, 5.0, 0.0099945068359375]
    • initial_value: (Exception: libinsane-quark: Libinsane opt[gamma]->get_value() error: 0x40000008, Access denied (9))
  13. threshold
    • title: Threshold
    • desc: Select minimum-brightness to get a white point
    • type: <GType gint (24)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: [0, 255, 1]
    • initial_value: (Exception: libinsane-quark: Libinsane opt[threshold]->get_value() error: 0x40000008, Access denied (9))
  14. rif
    • title: RIF
    • desc: Reverse image format
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: []
    • initial_value: False
  15. ht-type
    • title: Halftone type
    • desc: Control type of halftone filter
    • type: <GType gchararray (64)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: ['Default', 'Dither', 'Diffusion']
    • initial_value: (Exception: libinsane-quark: Libinsane opt[ht-type]->get_value() error: 0x40000008, Access denied (9))
  16. ht-pattern
    • title: Halftone pattern
    • desc: Control pattern of halftone filter
    • type: <GType gint (24)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: [0, 3, 1]
    • initial_value: (Exception: libinsane-quark: Libinsane opt[ht-pattern]->get_value() error: 0x40000008, Access denied (9))
  17. outline
    • title: Outline
    • desc: Perform outline extraction
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[outline]->get_value() error: 0x40000008, Access denied (9))
  18. emphasis
    • title: Emphasis
    • desc: Negative to smooth or positive to sharpen image
    • type: <GType gint (24)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: [-128, 127, 1]
    • initial_value: 0
  19. separation
    • title: Separation
    • desc: Enable automatic separation of image and text
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[separation]->get_value() error: 0x40000008, Access denied (9))
  20. mirroring
    • title: Mirroring
    • desc: Reflect output image horizontally
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[mirroring]->get_value() error: 0x40000008, Access denied (9))
  21. wl-follow
    • title: White level follower
    • desc: Control white level follower
    • type: <GType gchararray (64)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: ['Default', 'On', 'Off']
    • initial_value: (Exception: libinsane-quark: Libinsane opt[wl-follow]->get_value() error: 0x40000008, Access denied (9))
  22. bp-filter
    • title: BP filter
    • desc: Improves quality of high resolution ball-point pen text
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[bp-filter]->get_value() error: 0x40000008, Access denied (9))
  23. smoothing
    • title: Smoothing
    • desc: Enable smoothing for improved OCR
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[smoothing]->get_value() error: 0x40000008, Access denied (9))
  24. gamma-curve
    • title: Gamma curve
    • desc: Gamma curve, from light to dark, but upper two may not work
    • type: <GType gint (24)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: [0, 3, 1]
    • initial_value: (Exception: libinsane-quark: Libinsane opt[gamma-curve]->get_value() error: 0x40000008, Access denied (9))
  25. threshold-curve
    • title: Threshold curve
    • desc: Threshold curve, from light to dark, but upper two may not be linear
    • type: <GType gint (24)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: [0, 7, 1]
    • initial_value: (Exception: libinsane-quark: Libinsane opt[threshold-curve]->get_value() error: 0x40000008, Access denied (9))
  26. threshold-white
    • title: Threshold white
    • desc: Set pixels equal to threshold to white instead of black
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[threshold-white]->get_value() error: 0x40000008, Access denied (9))
  27. noise-removal
    • title: Noise removal
    • desc: Noise removal
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[noise-removal]->get_value() error: 0x40000008, Access denied (9))
  28. matrix-5x5
    • title: Matrix 5x5
    • desc: Remove 5 pixel square noise
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[matrix-5x5]->get_value() error: 0x40000008, Access denied (9))
  29. matrix-4x4
    • title: Matrix 4x4
    • desc: Remove 4 pixel square noise
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[matrix-4x4]->get_value() error: 0x40000008, Access denied (9))
  30. matrix-3x3
    • title: Matrix 3x3
    • desc: Remove 3 pixel square noise
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[matrix-3x3]->get_value() error: 0x40000008, Access denied (9))
  31. matrix-2x2
    • title: Matrix 2x2
    • desc: Remove 2 pixel square noise
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[matrix-2x2]->get_value() error: 0x40000008, Access denied (9))
  32. variance
    • title: Variance
    • desc: Set SDTC variance rate (sensitivity), 0 equals 127
    • type: <GType gint (24)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: [0, 255, 1]
    • initial_value: 0
  33. awd
    • title: Auto width detection
    • desc: Scanner detects paper sides. May reduce scanning speed.
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[awd]->get_value() error: 0x40000008, Access denied (9))
  34. ald
    • title: Auto length detection
    • desc: Scanner detects paper lower edge. May confuse some frontends.
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: []
    • initial_value: False
  35. compression
    • title: Compression
    • desc: Enable compressed data. May crash your front-end program
    • type: <GType gchararray (64)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: ['None']
    • initial_value: (Exception: libinsane-quark: Libinsane opt[compression]->get_value() error: 0x40000008, Access denied (9))
  36. compression-arg
    • title: Compression argument
    • desc: Level of JPEG compression. 1 is small file, 7 is large file. 0 (default) is same as 4
    • type: <GType gint (24)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: [0, 7, 1]
    • initial_value: (Exception: libinsane-quark: Libinsane opt[compression-arg]->get_value() error: 0x40000008, Access denied (9))
  37. df-action
    • title: DF action
    • desc: Action following double feed error
    • type: <GType gchararray (64)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: ['Default', 'Continue', 'Stop']
    • initial_value: Default
  38. df-skew
    • title: DF skew
    • desc: Enable double feed error due to skew
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[df-skew]->get_value() error: 0x40000008, Access denied (9))
  39. df-thickness
    • title: DF thickness
    • desc: Enable double feed error due to paper thickness
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[df-thickness]->get_value() error: 0x40000008, Access denied (9))
  40. df-length
    • title: DF length
    • desc: Enable double feed error due to paper length
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[df-length]->get_value() error: 0x40000008, Access denied (9))
  41. df-diff
    • title: DF length difference
    • desc: Difference in page length to trigger double feed error
    • type: <GType gchararray (64)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: ['Default', '10mm', '15mm', '20mm']
    • initial_value: (Exception: libinsane-quark: Libinsane opt[df-diff]->get_value() error: 0x40000008, Access denied (9))
  42. df-recovery
    • title: DF recovery mode
    • desc: Request scanner to reverse feed on paper jam
    • type: <GType gchararray (64)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: ['Default', 'Off', 'On']
    • initial_value: (Exception: libinsane-quark: Libinsane opt[df-recovery]->get_value() error: 0x40000008, Access denied (9))
  43. paper-protect
    • title: Paper protection
    • desc: Request scanner to predict jams in the ADF
    • type: <GType gchararray (64)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: ['Default', 'Off', 'On']
    • initial_value: (Exception: libinsane-quark: Libinsane opt[paper-protect]->get_value() error: 0x40000008, Access denied (9))
  44. adv-paper-protect
    • title: Advanced paper protection
    • desc: Request scanner to predict jams in the ADF using improved sensors
    • type: <GType gchararray (64)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: ['Default', 'Off', 'On']
    • initial_value: (Exception: libinsane-quark: Libinsane opt[adv-paper-protect]->get_value() error: 0x40000008, Access denied (9))
  45. staple-detect
    • title: Staple detection
    • desc: Request scanner to detect jams in the ADF caused by staples
    • type: <GType gchararray (64)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: ['Default', 'Off', 'On']
    • initial_value: (Exception: libinsane-quark: Libinsane opt[staple-detect]->get_value() error: 0x40000008, Access denied (9))
  46. bgcolor
    • title: Background color
    • desc: Set color of background for scans. May conflict with overscan option
    • type: <GType gchararray (64)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: ['Default', 'White', 'Black']
    • initial_value: (Exception: libinsane-quark: Libinsane opt[bgcolor]->get_value() error: 0x40000008, Access denied (9))
  47. dropoutcolor
    • title: Dropout color
    • desc: One-pass scanners use only one color during gray or binary scanning, useful for colored paper or ink
    • type: <GType gchararray (64)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: ['Default', 'Red', 'Green', 'Blue']
    • initial_value: (Exception: libinsane-quark: Libinsane opt[dropoutcolor]->get_value() error: 0x40000008, Access denied (9))
  48. buffermode
    • title: Buffer mode
    • desc: Request scanner to read pages quickly from ADF into internal memory
    • type: <GType gchararray (64)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: ['Default', 'Off', 'On']
    • initial_value: Off
  49. prepick
    • title: Prepick
    • desc: Request scanner to grab next page from ADF
    • type: <GType gchararray (64)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: ['Default', 'Off', 'On']
    • initial_value: (Exception: libinsane-quark: Libinsane opt[prepick]->get_value() error: 0x40000008, Access denied (9))
  50. overscan
    • title: Overscan
    • desc: Collect a few mm of background on top side of scan, before paper enters ADF, and increase maximum scan area beyond paper size, to allow collection on remaining sides. May conflict with bgcolor option
    • type: <GType gchararray (64)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: ['Default', 'Off', 'On']
    • initial_value: (Exception: libinsane-quark: Libinsane opt[overscan]->get_value() error: 0x40000008, Access denied (9))
  51. sleeptimer
    • title: Sleep timer
    • desc: Time in minutes until the internal power supply switches to sleep mode
    • type: <GType gint (24)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: [0, 60, 1]
    • initial_value: 0
  52. offtimer
    • title: Off timer
    • desc: Time in minutes until the internal power supply switches the scanner off. Will be rounded to nearest 15 minutes. Zero means never power off.
    • type: <GType gint (24)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: [0, 960, 1]
    • initial_value: (Exception: libinsane-quark: Libinsane opt[offtimer]->get_value() error: 0x40000008, Access denied (9))
  53. duplexoffset
    • title: Duplex offset
    • desc: Adjust front/back offset
    • type: <GType gint (24)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: [-16, 16, 1]
    • initial_value: (Exception: libinsane-quark: Libinsane opt[duplexoffset]->get_value() error: 0x40000008, Access denied (9))
  54. greenoffset
    • title: Green offset
    • desc: Adjust green/red offset
    • type: <GType gint (24)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: [-16, 16, 1]
    • initial_value: (Exception: libinsane-quark: Libinsane opt[greenoffset]->get_value() error: 0x40000008, Access denied (9))
  55. blueoffset
    • title: Blue offset
    • desc: Adjust blue/red offset
    • type: <GType gint (24)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: [-16, 16, 1]
    • initial_value: (Exception: libinsane-quark: Libinsane opt[blueoffset]->get_value() error: 0x40000008, Access denied (9))
  56. lowmemory
    • title: Low Memory
    • desc: Limit driver memory usage for use in embedded systems. Causes some duplex transfers to alternate sides on each call to sane_read. Value of option 'side' can be used to determine correct image. This option should only be used with custom front-end software.
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: []
    • initial_value: False
  57. side
    • title: Duplex side
    • desc: Tells which side (0=front, 1=back) of a duplex scan the next call to sane_read will return.
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: []
    • initial_value: False
  58. hwdeskewcrop
    • title: Hardware deskew and crop
    • desc: Request scanner to rotate and crop pages digitally.
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[hwdeskewcrop]->get_value() error: 0x40000008, Access denied (9))
  59. swdeskew
    • title: Software deskew
    • desc: Request driver to rotate skewed pages digitally.
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: []
    • initial_value: False
  60. swdespeck
    • title: Software despeckle diameter
    • desc: Maximum diameter of lone dots to remove from scan.
    • type: <GType gint (24)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: [0, 9, 1]
    • initial_value: 0
  61. swcrop
    • title: Software crop
    • desc: Request driver to remove border from pages digitally.
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: []
    • initial_value: False
  62. swskip
    • title: Software blank skip percentage
    • desc: Request driver to discard pages with low percentage of dark pixels
    • type: <GType gdouble (60)>
    • unit: <enum LIBINSANE_UNIT_PERCENT of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • constraint: [0.0, 100.0, 0.100006103515625]
    • initial_value: 0.0
  63. halt-on-cancel
    • title: Halt on Cancel
    • desc: Request driver to halt the paper feed instead of eject during a cancel.
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[halt-on-cancel]->get_value() error: 0x40000008, Access denied (9))
  64. endorser-options
    • title: Endorser Options
    • desc: Controls for endorser unit
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[endorser-options]->get_value() error: 0x40000008, Access denied (9))
  65. endorser
    • title: Endorser
    • desc: Enable endorser unit
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[endorser]->get_value() error: 0x40000008, Access denied (9))
  66. endorser-bits
    • title: Endorser bits
    • desc: Determines maximum endorser counter value.
    • type: <GType gint (24)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: [16, 24, 8]
    • initial_value: (Exception: libinsane-quark: Libinsane opt[endorser-bits]->get_value() error: 0x40000008, Access denied (9))
  67. endorser-val
    • title: Endorser value
    • desc: Initial endorser counter value.
    • type: <GType gint (24)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: [0, 65535, 1]
    • initial_value: (Exception: libinsane-quark: Libinsane opt[endorser-val]->get_value() error: 0x40000008, Access denied (9))
  68. endorser-step
    • title: Endorser step
    • desc: Change endorser counter value by this much for each page.
    • type: <GType gint (24)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: [-2, 2, 1]
    • initial_value: (Exception: libinsane-quark: Libinsane opt[endorser-step]->get_value() error: 0x40000008, Access denied (9))
  69. endorser-y
    • title: Endorser Y
    • desc: Endorser print offset from top of paper.
    • type: <GType gdouble (60)>
    • unit: <enum LIBINSANE_UNIT_MM of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: [0.0, 876.695068359375, 0.0211639404296875]
    • initial_value: (Exception: libinsane-quark: Libinsane opt[endorser-y]->get_value() error: 0x40000008, Access denied (9))
  70. endorser-font
    • title: Endorser font
    • desc: Endorser printing font.
    • type: <GType gchararray (64)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: ['Horizontal', 'Horizontal bold', 'Horizontal narrow', 'Vertical', 'Vertical bold']
    • initial_value: (Exception: libinsane-quark: Libinsane opt[endorser-font]->get_value() error: 0x40000008, Access denied (9))
  71. endorser-dir
    • title: Endorser direction
    • desc: Endorser printing direction.
    • type: <GType gchararray (64)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: ['Top to bottom', 'Bottom to top']
    • initial_value: (Exception: libinsane-quark: Libinsane opt[endorser-dir]->get_value() error: 0x40000008, Access denied (9))
  72. endorser-side
    • title: Endorser side
    • desc: Endorser printing side, requires hardware support to change
    • type: <GType gchararray (64)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: ['Front', 'Back']
    • initial_value: (Exception: libinsane-quark: Libinsane opt[endorser-side]->get_value() error: 0x40000008, Access denied (9))
  73. endorser-string
    • title: Endorser string
    • desc: Endorser alphanumeric print format. %05ud or %08ud at the end will be replaced by counter value.
    • type: <GType gchararray (64)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[endorser-string]->get_value() error: 0x40000008, Access denied (9))
  74. top-edge
    • title: Top edge
    • desc: Paper is pulled partly into adf
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • constraint: []
    • initial_value: False
  75. a3-paper
    • title: A3 paper
    • desc: A3 paper detected
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • constraint: []
    • initial_value: False
  76. b4-paper
    • title: B4 paper
    • desc: B4 paper detected
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • constraint: []
    • initial_value: False
  77. a4-paper
    • title: A4 paper
    • desc: A4 paper detected
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • constraint: []
    • initial_value: False
  78. b5-paper
    • title: B5 paper
    • desc: B5 paper detected
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • constraint: []
    • initial_value: False
  79. page-loaded
    • title: Page loaded
    • desc: Page loaded
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • constraint: []
    • initial_value: True
  80. omr-df
    • title: OMR or DF
    • desc: OMR or double feed detected
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • constraint: []
    • initial_value: False
  81. cover-open
    • title: Cover open
    • desc: Cover open
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • constraint: []
    • initial_value: False
  82. power-save
    • title: Power saving
    • desc: Scanner in power saving mode
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • constraint: []
    • initial_value: True
  83. email
    • title: Email button
    • desc: Email button
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • constraint: []
    • initial_value: False
  84. manual-feed
    • title: Manual feed
    • desc: Manual feed selected
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • constraint: []
    • initial_value: False
  85. scan
    • title: Scan button
    • desc: Scan button
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • constraint: []
    • initial_value: False
  86. function
    • title: Function
    • desc: Function character on screen
    • type: <GType gint (24)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • constraint: []
    • initial_value: 1
  87. ink-low
    • title: Ink low
    • desc: Imprinter ink running low
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[ink-low]->get_value() error: 0x40000008, Access denied (9))
  88. double-feed
    • title: Double feed
    • desc: Double feed detected
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • constraint: []
    • initial_value: False
  89. error-code
    • title: Error code
    • desc: Hardware error code
    • type: <GType gint (24)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • constraint: []
    • initial_value: 0
  90. skew-angle
    • title: Skew angle
    • desc: Requires black background for scanning
    • type: <GType gint (24)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • constraint: []
    • initial_value: 0
  91. ink-remain
    • title: Ink remaining
    • desc: Imprinter ink level
    • type: <GType gint (24)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[ink-remain]->get_value() error: 0x40000008, Access denied (9))
  92. duplex
    • title: Duplex switch
    • desc: Duplex switch
    • type: <GType gboolean (20)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[duplex]->get_value() error: 0x40000008, Access denied (9))
  93. density
    • title: Density
    • desc: Density dial
    • type: <GType gint (24)>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • capabilities: <flags 0 of type Libinsane.Capability>
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[density]->get_value() error: 0x40000008, Access denied (9))

测试扫描

操作系统: Linux

测试成功: True

  • 来源: feeder Duplex
  • 分辨率: 100 dpi
  • 模式: Color
Pages are very high/large. Had to lower resolution to get a smaller report.

408_traces.txt: [raw] [colorized]

image_408_0.png:
scan result image_408_0.png image_408_0_boxes.png:
scan result image_408_0_boxes.png

附加信息

  • OS type: posix
  • Test program: ironscanner 2.0-22-gf97ae95
  • Scan library: Libinsane 1.0.1
  • Pillow: 6.1.0
  • Python version: 3.7.4 (default, Jul 16 2019, 07:12:58) [GCC 9.1.0]
  • Architecture:
  • Platform:
    • Short: Linux
    • Detailed: Linux-5.2.7-arch1-1-fsync-x86_64-with-arch-Arch-Linux
    • Release:
    • System: Linux
  • Architecture:
  • CPU frequency: 4000
  • Number of CPUs: 4
  • Processor:
  • Machine: x86_64
  • Memory: 16821874688

Reported by: [Paul Tirk]

REST API link: /api/v1/scannerdb/scan_reports/408/