Scan report 301 - CANON DR-2010C

Home

acer
agfa
artec
avision
brother
canon
- 8800f
- 9000f
- 9000f mark ii
- dr-2010c
  - Sept. 7, 2019, 12:25 p.m.
- dr-2580c
- dr-5010c
- dr-c130
- dr-m160
- g7050
- gx6500
- i-sensys mf3010
- i-sensys mf440
- ir c3222l
- laserbase mf5730
- lide 100
- lide 110
- lide 120
- lide 200
- lide 210
- lide 220
- lide 25
- lide 30
- lide 300
- lide 35
- lide 400
- lide 60
- mb5100
- mb5120
- mf4010
- mf440
- mg2400
- mg3051
- mg3150
- mg3600
- mg3650
- mg4200
- mg5700
- mg6800
- mg6850
- mg7500
- mp160
- mp280
- mp495
- mx340
- mx350
- mx495
- mx5120
- mx520
- mx850
- mx920
- mx925
- n650u
- n656u
- p-208ii
- p-215
- r40
- tr4600
- tr7500
- tr8500
- ts3300
- ts7400
- ts8151
- ts8300
- ts9500
dell
epson
fujitsu
hp
kaiser baas
kodak
konica minolta
kyocera
lexmark
neat
oki
plustek
ricoh
samsung
toshiba
wia
xerox

Scanner

Manufacturer: CANON
Model: DR-2010C
Nice name: CANON DR-2010C
Device ID: sane:canon_dr:libusb:001:003
Type: Adf_Duplex

source
- title: Scan source
- desc: Selects the scan source (such as a document-feeder).
- type: <GType gchararray (64)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: ['ADF Front', 'ADF Duplex']
- initial_value: ADF Front
mode
- title: Scan mode
- desc: Selects the scan mode (e.g., lineart, monochrome, or color).
- type: <GType gchararray (64)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: ['Lineart', 'Gray', 'Color']
- initial_value: Color
resolution
- title: Scan resolution
- desc: Sets the resolution of the scanned image.
- type: <GType gint (24)>
- unit: <enum LIBINSANE_UNIT_DPI of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: [100, 150, 200, 240, 300, 400]
- initial_value: 300
page-width
- title: Page width
- desc: Specifies the width of the media. Required for automatic centering of sheet-fed scans.
- type: <GType gdouble (60)>
- unit: <enum LIBINSANE_UNIT_MM of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: [0.0, 215.8721923828125, 0.0211639404296875]
- initial_value: 215.8721923828125
page-height
- title: Page height
- desc: Specifies the height of the media.
- type: <GType gdouble (60)>
- unit: <enum LIBINSANE_UNIT_MM of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: [0.0, 355.55419921875, 0.0211639404296875]
- initial_value: 355.55419921875
tl-x
- title: Top-left x
- desc: Top-left x position of scan area.
- type: <GType gdouble (60)>
- unit: <enum LIBINSANE_UNIT_MM of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: [0.0, 215.8721923828125, 0.0211639404296875]
- initial_value: 0.0
tl-y
- title: Top-left y
- desc: Top-left y position of scan area.
- type: <GType gdouble (60)>
- unit: <enum LIBINSANE_UNIT_MM of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: [0.0, 355.55419921875, 0.0211639404296875]
- initial_value: 0.0
br-x
- title: Bottom-right x
- desc: Bottom-right x position of scan area.
- type: <GType gdouble (60)>
- unit: <enum LIBINSANE_UNIT_MM of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: [0.0, 215.8721923828125, 0.0211639404296875]
- initial_value: 215.8721923828125
br-y
- title: Bottom-right y
- desc: Bottom-right y position of scan area.
- type: <GType gdouble (60)>
- unit: <enum LIBINSANE_UNIT_MM of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: [0.0, 355.55419921875, 0.0211639404296875]
- initial_value: 355.55419921875
brightness
- title: Brightness
- desc: Controls the brightness of the acquired image.
- type: <GType gint (24)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: [-127, 127, 1]
- initial_value: 0
contrast
- title: Contrast
- desc: Controls the contrast of the acquired image.
- type: <GType gint (24)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: [-127, 127, 1]
- initial_value: 0
threshold
- title: Threshold
- desc: Select minimum-brightness to get a white point
- type: <GType gint (24)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: [0, 255, 1]
- initial_value: (Exception: libinsane-quark: Libinsane opt[threshold]->get_value() error: 0x40000008, Access denied (9))
rif
- title: RIF
- desc: Reverse image format
- type: <GType gboolean (20)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags 0 of type Libinsane.Capability>
- constraint: []
- initial_value: (Exception: libinsane-quark: Libinsane opt[rif]->get_value() error: 0x40000008, Access denied (9))
compression
- title: Compression
- desc: Enable compressed data. May crash your front-end program
- type: <GType gchararray (64)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags 0 of type Libinsane.Capability>
- constraint: ['None']
- initial_value: (Exception: libinsane-quark: Libinsane opt[compression]->get_value() error: 0x40000008, Access denied (9))
compression-arg
- title: Compression argument
- desc: Level of JPEG compression. 1 is small file, 100 is large file.
- type: <GType gint (24)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags 0 of type Libinsane.Capability>
- constraint: [0, 0, 1]
- initial_value: (Exception: libinsane-quark: Libinsane opt[compression-arg]->get_value() error: 0x40000008, Access denied (9))
df-thickness
- title: DF by thickness
- desc: Detect double feeds using thickness sensor
- type: <GType gboolean (20)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: []
- initial_value: False
df-length
- title: DF by length
- desc: Detect double feeds by comparing document lengths
- type: <GType gboolean (20)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: []
- initial_value: False
rollerdeskew
- title: Roller deskew
- desc: Request scanner to correct skewed pages mechanically
- type: <GType gboolean (20)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: []
- initial_value: False
swdeskew
- title: Software deskew
- desc: Request driver to rotate skewed pages digitally
- type: <GType gboolean (20)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: []
- initial_value: False
swdespeck
- title: Software despeckle diameter
- desc: Maximum diameter of lone dots to remove from scan
- type: <GType gint (24)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: [0, 9, 1]
- initial_value: 0
swcrop
- title: Software crop
- desc: Request driver to remove border from pages digitally
- type: <GType gboolean (20)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: []
- initial_value: False
swskip
- title: Software blank skip percentage
- desc: Request driver to discard pages with low percentage of dark pixels
- type: <GType gdouble (60)>
- unit: <enum LIBINSANE_UNIT_PERCENT of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: [0.0, 100.0, 0.100006103515625]
- initial_value: 0.0
stapledetect
- title: Staple detect
- desc: Request scanner to halt if stapled pages are detected
- type: <GType gboolean (20)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: []
- initial_value: False
dropout-front
- title: Dropout color front
- desc: One-pass scanners use only one color during gray or binary scanning, useful for colored paper or ink
- type: <GType gchararray (64)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: ['None', 'Red', 'Green', 'Blue', 'Enhance Red', 'Enhance Green', 'Enhance Blue']
- initial_value: (Exception: libinsane-quark: Libinsane opt[dropout-front]->get_value() error: 0x40000008, Access denied (9))
dropout-back
- title: Dropout color back
- desc: One-pass scanners use only one color during gray or binary scanning, useful for colored paper or ink
- type: <GType gchararray (64)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: ['None', 'Red', 'Green', 'Blue', 'Enhance Red', 'Enhance Green', 'Enhance Blue']
- initial_value: (Exception: libinsane-quark: Libinsane opt[dropout-back]->get_value() error: 0x40000008, Access denied (9))
buffermode
- title: Buffer mode
- desc: Request scanner to read pages async into internal memory
- type: <GType gboolean (20)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: []
- initial_value: False
side
- title: Duplex side
- desc: Tells which side (0=front, 1=back) of a duplex scan the next call to sane_read will return.
- type: <GType gboolean (20)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags 0 of type Libinsane.Capability>
- constraint: []
- initial_value: False
start
- title: Start/1 button
- desc: Big green or small 1 button
- type: <GType gboolean (20)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
- constraint: []
- initial_value: False
stop
- title: Stop/2 button
- desc: Small orange or small 2 button
- type: <GType gboolean (20)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
- constraint: []
- initial_value: False
button-3
- title: 3 button
- desc: Small 3 button
- type: <GType gboolean (20)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
- constraint: []
- initial_value: False
newfile
- title: New File button
- desc: New File button
- type: <GType gboolean (20)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
- constraint: []
- initial_value: False
countonly
- title: Count Only button
- desc: Count Only button
- type: <GType gboolean (20)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
- constraint: []
- initial_value: False
bypassmode
- title: Bypass Mode button
- desc: Bypass Mode button
- type: <GType gboolean (20)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
- constraint: []
- initial_value: False
counter
- title: Counter
- desc: Scan counter
- type: <GType gint (24)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
- constraint: [0, 500, 1]
- initial_value: 0
adf-loaded
- title: ADF Loaded
- desc: Paper available in ADF input hopper
- type: <GType gboolean (20)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags 0 of type Libinsane.Capability>
- constraint: []
- initial_value: (Exception: libinsane-quark: Libinsane opt[adf-loaded]->get_value() error: 0x40000008, Access denied (9))
card-loaded
- title: Card Loaded
- desc: Paper available in card reader
- type: <GType gboolean (20)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags 0 of type Libinsane.Capability>
- constraint: []
- initial_value: (Exception: libinsane-quark: Libinsane opt[card-loaded]->get_value() error: 0x40000008, Access denied (9))

Test scan

OS: Linux

Test successful: True

Source: feeder Front
Resolution: 150 dpi
Mode: Color

301_traces.txt: [raw] [colorized]

image_301_0.png:
scan result image_301_0.png image_301_0_boxes.png:
scan result image_301_0_boxes.png

Additional information

OS type: posix
Test program: ironscanner 2.0-15-g60aba18
Scan library: Libinsane 1.0.1-9-g1690e44
Pillow: 5.4.1
Python version: 3.7.3 (default, Apr 3 2019, 05:39:12) [GCC 8.3.0]
Architecture:
Platform:
- Short: Linux
- Detailed: Linux-4.19.0-5-amd64-x86_64-with-debian-10.0
- Release:
- System: Linux

Architecture:
CPU frequency: 3500
Number of CPUs: 6
Processor:
Machine: x86_64
Memory: 16802332672

Reported by: [Mathieu Roy]

REST API link: /api/v1/scannerdb/scan_reports/301/